SAFETY CENTER

Product Warning Notice – Item FM223F55R Date: 06/08/2020 Dear Valued Customers, It recently came to our attention that ammunition from two (2) production lots of 223 55 GR FMJ REMAN cartridges have a possible powder issue.  These lots were shipped between the dates of 5/1/2020 and 6/2/2020.   We need to know if you have the lots or do not.  The Lot #’s areK200512353305, K200505353305, and K200507353305     Please email customer service at support@megatechammunution.com  to speak with one of our Customer Service representatives who will process your return and arrange the replacement of your product without any additional cost to you.  To expedite this process, please have your order number ready.  If you do not have the lot, we will note this, so you do not keep getting emails. Below is what the labels look like the lot is highlighted in yellow on here. These pictures are for reference of where the lot number is only. Product Warning & Recall Notice – Item FM44RF200N Date: 03/26/2018 Dear Valued Customers, It recently came to our attention that one lot of our 44 Mag 200 grain ammunition may not generate enough pressure to allow the projectile to exit the barrel when fired. Use of this product could result in firearms damage or personal injury. If you have ammunition from Lot L170615037506-44 or L170615037506-52, please  speak with one of our Customer Service representatives who will process your return and arrange the replacement of your product without any additional cost to you.  To expedite this process, please have your order number ready. We would like to extend our apology for any inconvenience this may have caused you and we thank you for your partnership to help us improve.   Best Regards, The Freedom Munitions Customer Service Team  

Dear Valued Customers, It is important to us that we provide you with the quality of ammunition that you expect when purchasing from Ammo Shop  As a part of our ongoing evaluation process, we have found that some 45 Long Colt 255 grain FP New cartridges with lot number L170307130105 may not align with our quality standards. If you were shipped product between 3/10/2017 – 3/29/2017  we kindly request that you review the Lot Number on your product to determine if it is from the following production lot: L170307130105.   If you have ammunition from Lot L170307130105, please contact support@megatechammunution.com to speak with one of our Customer Service representatives who will process your return and arrange the replacement of your product without any additional cost to you.  To expedite this process please have your order number ready.  Please accept our apology for any inconvenience this may have caused and thank you for your partnership to help us improve. Best Regards, The Freedom Munitions Customer Service Team  

  Dear Valued Freedom Munitions Customer: Our goal is to offer the customer the best quality ammunition at the lowest possible price. Out of an abundance of caution, we believe there may be some ammunition that was shipped which did not meet our exacting standards. In an effort to maintain these high standards, Freedom Munitions would like you to review your recent order of .223 Remington 55 grain FMJ Reman ammunition manufactured between 1/18/15 – 1/23/15 and 3/2/15. We believe that your order was shipped on or after one of these dates and may contain some ammunition that we feel is not up to our standard of quality. Please check your ammunition box for the following lot numbers marked in red. The lot number information is located on the white sticker on the end of each fifty (50) count box below the bar code. Ammo Shop remanufacturing process produces high quality ammunition that compares to new.  We purchase fired brass only from indoor ranges.  After sorting by caliber, cases are checked for defects using Scharch Range Master case processing equipment.  The Scharch processing machines automatically check for debris inside the case and pressure tests each case for splits or cracks.  Next, the primers are removed, flash holes are cleared and the primer pocket is reamed to easily accept a new primer.  After processing the cases are re-sized to SAAMI specifications, wet washed and dried. The processed cases are clean, shiny and ready for loading.

If your ammunition contains any of the lot numbers:xxxxx-17490-xx xxxxx-17492-xx xxxxx-17710-xx xxxxx-21937-xx

We ask that you please call our customer service  or send an email tosupport@megatechammunution.com us confirming that you do OR do not have any of these lots of ammunition. We apologize for any inconvenience this may cause and look forward to hearing from you so we may answer any question you have. We greatly appreciate your help with this! If you do have any of these lot numbers, we ask that you call or email us with your full name, order number, contact number, and the number of rounds you have remaining from the lot. A pre-paid return shipping label will be emailed to you so this product can be returned to our factory for inspection, at our cost. We will provide replacement product to you immediately. Please contact us if you have any questions or need additional information. Best regards, The Freedom Munitions Customer Service Team

Dear Valued Freedom Munitions Customer: Our goal is to offer the customer the best quality ammunition at the lowest possible price. Out of an abundance of caution, we believe there may be some ammunition that was shipped which did not meet our exacting standards. In an effort to maintain these high standards, we would like you to review your order of 300 Blackout 150 gr FMJ Reman ammunition manufactured on 9/1/2014. We would appreciate if you could check your ammunition for the following lot number: 8845-7305-XX. (7305 is the key portion.) The lot number information is located on the white sticker on the end of the 50 count box. It is below the bar code and corresponding bar code numbers. If you find you have any of this lot number, please advise me of the number of rounds you have and a Return Label will be emailed to you so this product can be returned to our factory. We will provide replacement product. We ask that you please call or send an email confirming you do or do not have this lot. We apologize for any inconvenience this may cause. Please contact us if you have any questions or need additional information. Best regards,  

Dear Valued Freedom Munitions Customer: Our goal is to offer our customers the best quality ammunition at the lowest possible price. Out of an abundance of caution, we believe there may be some ammunition that was shipped which did not meet our exacting standards. In an effort to maintain these high standards,  would like you to review your recent order of 9mm 115 gr. RN Reman and 9mm 115gr RN New ammunition manufactured on 2/4/15. We believe that your order was shipped on or after this date and may contain some ammunition that we feel is not up to our standard of quality. Please check your ammunition for the following lot number. Lot information is located on the white sticker on the end of each fifty (50) count box below the bar code. If your ammunition contains the following lot number: xxxxx-18943-xx  Reman   Xxxxx-19685-xxxx  New If you do have this lot number, we ask that you call or email us with your full name, order number, contact number, and the number of rounds you have remaining from the lot. A pre-paid return shipping label will be emailed to you so this product can be returned to our factory for inspection at our cost. We will provide replacement product to you immediately as a thank you for your assistance in this matter. Please contact us if you have any questions or need additional information. Best regards, The Freedom Munitions Customer Service Team

We have discovered an issue with three lots of Freedom Munitions 9mm 115 gr. RN Reman ammunition manufactured between 1/25/15 and 1/29/15. We would appreciate if you could check your ammunition for the following lot numbers:   18605-17996-47-60 19691-18219-89-117 18605-18518-47-60 (17996, 18219, 18518 are the key portions.) The lot number information is located on the white sticker on the end of the 50 count box. It is below the bar code and corresponding bar code numbers. If you find you have any of these lot numbers, please advise us of the number of rounds you have, and a Return Label will be emailed to you, so this product can be returned to our factory. We will provide replacement product We ask that you please email our customer service group atsupport@megatechammunution.com. We apologize for any inconvenience this may cause. Please contact us if you have any questions or need additional information.   Best regards, The Freedom Munitions Team!